Programmable Hormann Garage Remote Control 868MHz BS Bisecur Compatible with HSE1 HSE2 HSE4 HS1 HS4 HS5 HSD2 HSP4 Handheld Transmitters

Description

Programmable Hormann Garage Remote Control 868MHz BS Bisecur Compatible with HSE1 HSE2 HSE4 HS1 HS4 HS5 HSD2 HSP4 Handheld Transmitters

Safer life starts with our products!

Compatible with：

HS 1 BS
HS 4 BS
HS 5 BS
HSS 4 BS
HSE 1 BS
HSE 2 BS
HSE 4 BS
HSP 4 BS
HSD 2 BS
HS1-868-BS
HS4-868-BS
HS5-868-BS
HSS4-868-BS
HSE1-868-BS
HSE2-868-BS
HSE4-868-BS
HSP4-868-BS
HSD2-868-BS

NOTE: If your original remote control works in Red LED, please contact us before placing an order.

NOTE: If your original remote control works in Blue LED, can place orders directly.

Include

1x Remote Control
1 x Battery
1 x Keychain
1 x English Manual

NOTE: Button 1 is only for decoration, no other function.

How to clone？

Programming Methods of Rolling Code (Blue LED):

NOTE: Factory default Rolling Code(Blue LED) ! If your original remote control works in fixed code(Red LED), it will not work.

Copy the Code from Original Remote

1. Pressing and hold the button of the NEW remote control that you want to store the code from the original remote, keep it pressed, pressing one of any other button 3 times, until the LED lights up red, then release all buttons.

2. Placing the Original remote on the left or right of the NEW remote, as close as possible.

3. Pressing and hold the button of the Original remote control for about 13s, until the indicator light flashes red and blue alternately. The learning procedure will be finished when the NEW remote LED flashes quickly in blue, release all buttons.

4. You new remote control is programmed.

5. Please do the same procedure for the rest of buttons.

NOTE: You have 15 seconds to transmit the code. The process must be repeated if the radio code is not successfully transmitted within this time.

Programming with the Receiver

If the original remote control is lost, the new remote can be programmed directly with the receiver .

1. Find the “Learning” or “Program” button on the receiver, press it and you’ll see the indicator light start flashing.

2. While the indicator light is flashing, press the button on the NEW remote control until the receiver indicator light flashes quickly, which indicates that the NEW remote control has been programmed successfully.(Keep the remote control as close to the receiver as possible when programming)

Delete All Code:

Each button of remote control is assigned to a new radio code by means of the following steps.

1. Open the battery lid and remove the battery for 10 seconds.

2. Press one button of remote control and keep it pressed.

3. Insert the battery,

– The LED slowly flashes in blue for 4 seconds,

– The LED flashes rapidly in blue for 2 seconds,

– The LED is illuminated blue for a long time.

4. Releasethe buttonof remote control, all radio codes are newly assigned.

NOTE:If the button of remote control is released prematurely, no new radio codes are assigned.

Fixed Code Instruction

Set the Fixed Code 868 MHz

1. Open the battery lid and remove the battery for 10 seconds.

2. Press one button of remote control and keep it pressed.

3. Insert the battery,

– The LED slowly flashes in Blue for 4 seconds,

– The LED flashes rapidly in Blue for 2 seconds,

– The LED is illuminated Blue for a long time.

– The LED slowly flashes in Red for 4 seconds.

– The LED flashes rapidly in Red for 2 seconds.

– The LED is illuminated Red for a long time.

4. Release the remote control button. To test, press any button on the remote control, the LED lights up Red, indicating that it has been successfully converted to fixed code.

Programming with the Receiver

1. Find the “Learning” or “Program” button on the receiver, press it and you’ll see the indicator light start flashing.

2. While the indicator light is flashing, press the button on the remote control until the receiver indicator light flashes quickly, which indicates that the remote control has been programmed successfully.(Keep the remote control as close to the receiver as possible when programming)

NOTE:Fixed code mode can only program with theHormann 868mhz(Grey hand transmitters with blue buttons or the device designation HSD2-868)Fixed code receiver！Can’t copy  with the original remote control.

Return:

Returns are accepted .

In case of a refund all items must be returned undamaged, in a re-sellable condition.

For DOA (Defective On Arrival) items, which will be replaced or refunded, please inform us within 24 hours of arrival, please also keep all of the components and original packaging as further checking might be required.

Faulty items must be returned for repair or exchange.

Buyer is responsible for all shipping costs of returning an item for a refund or exchange .

Delivery:

All products are individually inspected before being dispatched, to ensure items are sent out in perfect condition.

Items will be shipped within 48 hours after payment is received / cleared (except weekends and holidays).

Feedback:

1. We are committed to your satisfaction. Your positive feedback and 5 stars rating will be highly appreciated.

2. If you are not satisfied by any means, please give us an opportunity to offer you a proper solution. Thanks!

Contact us:

1.If you have any question, Please contact us.All message will be answered within 24 hours from Monday to Saturday.
2. Please contact us before leaving any negative or neutral feedback or opening disputes, we will work with you to solve any problems.