Enhanced PSP GO Power Armor Battery Pack Retrofits Kit with 2x Longer Operation Time
$23.23
Description
Enhanced PSP GO Power Armor Battery Pack Retrofits Kit with 2x Longer Operation Time
hello. This link PSP GO powered armor shell has no more patterns.
If you need other more patterns behind it, look for links to other items in the store.
Please note:
Because there are many sub-categories of products, different classification pictures represent different products, please carefully check whether the classification pictures are consistent with your needs when placing an order, so as to avoid errors when placing an order.Please make sure that the picture you order is the product you need to avoid placing the wrong order
Make sure you need the product before you buy it. If you return the product, it will be returned to AliExpress warehouse for destruction and cannot be returned to us. We are also responsible for shipping costs, platform transaction taxes, and cargo destruction and handling fees. For us, the loss is very high,could be blacklisted. If you have problems in use, please leave a message to the store customer service, some products may encounter operational problems, need guidance. If the problem is small and does not affect the use of some products, please apply for a partial refund rather than return. Thank you for your understanding…
2x longer operation time with original 2200mhA battery!
Use PSV1000 original 2200mhA SP65M battery, can be extended 2 times the running time! This is the PSP GO enhanced modified back cover, can enable PSP GO to use PSV 2200mhA SP65M battery, extended running time double! However, the batteries are contraband from our mail, so you need to prepare your own. We only sell retrofit kits. You can buy them at stores that specialize in batteries, and they have shipping channels. More stable ergonomic design, feel comfortable, can be held for a long time to play! The precise design and layout of the psp go takes only 5 minutes to assemble.
The position of the screw holes for strengthening the rear cover is in accordance with the parameters of the original PSPG0 shell, so you can continue to use the original screw installation, perfect fit.In addition to the case, it comes with a battery holder for precise setting without having to use tape to hold the battery in place.And the design of the back cover adhesive strip and the original back cover to maintain the same.
Packet composition
The reinforced rear cover kit includes:
1. High precision rear cover has been installed with rubber strip .
2. Precise battery holder .
3. A screwdriver.
4. Six screws as original specification.
How to install it?
1. Loosen the screws and take out the rear cover of the PSP GO.
2. Remove the original battery.
3. Install the new battery on the support and fasten the screws.
4. Replace the reinforced rear cover with the original screws.
5. Charge and activate the battery (must do this or it may not start)
6. Power on the device.
Note: Tightening the screws near L and R will affect LR elasticity. If the installation starts but does not charge, it usually indicates that the battery socket is loose. Reinstall it. There may be gaps in some positions, which is a normal phenomenon.
1: This is the WIFI antenna removed from the original shell installation.
2: Battery jack, it should be noted here that some PSV1000 batteries need to be corrected for plastic parts refer to the figure below.
The following is the display drawing after the buyer’s arrival and installation.
