32PCS 18650 DIY Power Bank Case with QC3.0 Quick Charge Capability for iPhone Xiaomi Huawei Battery Shell

Description

32PCS 18650 DIY Power Bank Case with QC3.0 Quick Charge Capability for iPhone Xiaomi Huawei Battery Shell

If you receive the product and find that the LED display has scratches. Please don’t worry. This is normal. Because the screen is very fragile, it is easy to scratch. However, it is protected with a protective film. You can remove the protective film.

Note:

1, The positive and negative poles need to be seen clearly before installation.
2, Some power bank case supply displays “0” after the battery is installed, and needs to be charged to activate the battery.
3, In models with fast charge: PD fast charge is output through Type-C port; The USB port output is QC fast charge, the two are not the same.

LED display is abnormal:
The charging treasure is fully discharged once from 100%-0%.
The first cycle is to install the battery first, then fully charge (100%) and then fully discharge (0%).
When 0% is displayed, recharge the power bank fully (100%), and then fully discharge (0%).
After about 5-6 cycles, the display will show the normal battery level.
Feature:
Can install 32PCS 18650 batteries
*Integrated QC2.0/QC3.0 output fast charging protocol
*Integrated FCP input/output fast charging protocol
*Integrated AFC input/output fast charging protocol
*Integrated high-voltage SCP output fast charging protocol
*Integrated USB C DRP protocol, supports input and output
fast charging
*Compatible with BC1.2, Apple, Samsung mobile phone
fast charging
*Integrated Lightning input communication
*Support PD2.0 bidirectional input/output protocol
*Support PD3.0 input/output, PPS output protocol
*Supports 5V, 9V, 12V voltage gear input
*Supports 5V, 9V, 12V voltage gear output
*PPS supports 3.3~11V, 20mV/Step output voltage gear
* Built-in 14bit ADC and coulometer
*Synchronous switch discharge 5V@2A, efficiency reaches
over 95%
*Support line compensation

※ C32-Ordinary Version
Max Output/Input: 5V-2.1A
※ C32-Quick Charge Version
Max Output: 5V-3.1A / 9V-2.22A / 12V-1.67A / 4.5V-5A / 5V-4.5A
Max Input: 5V-3A / 9V-2A/ 12V-1.5A

※ C32-Wireless Quick Charge Version
Max Output: 5V-3.1A / 9V-2.22A / 12V-1.67A / 4.5V-5A / 5V-4.5A
Wireless Output: 5W,7.5W,10W,15W
Max Input: 5V-3A / 9V-2A/ 12V-1.5A
Package Included:
USB 32*18650 Power Bank Case (Batteries not include)

Note:
1, Don’t use pointed batteries. Batteries with damaged appearance are not use.
It is not recommended to use the battery with high internal resistance, long storage time and many times of use.
2, Only 18650 flat-head batteries can be used, and the voltage is in line with 3.2V-4.2V. You need to use brand new batteries. Old batteries and damaged batteries will cause failure to work.
3, Incorrect connection of positive and negative poles, will burn out the circuit board.
4, The first time you need to use the battery full.
5, Charging power depends on your device, for example: 9V-2A, if your device supports 9V-2A, then it will automatically jump to 9V-2A, if not, it will not jump.

The Burned Spring Was Caused By Short Circuit Of Battery And Misoperation.The spring spring is integrated, which is equivalent to two wires. If it is installed reversely, in other words, one positive pole and one negative pole are installed at the same time, which means that two wires are directly connected in a short distance, and the strong current will instantly shrink the spring, or even burn it off. In addition, the battery skin is broken, the battery is damaged, the battery voltage difference is large, and the internal resistance difference is relatively large, which will burn the spring. Whatever the reason, it has nothing to do with the product itself. Those customers who submitted a dispute and said that the spring was burnt out just after receiving the product, please ask your heart carefully.