10 Rolls 1.75mm PLA ABS PETG Filament Bundle for 3D Printing Enthusiasts and Professionals
$77.01
Description
10 Rolls 1.75mm PLA ABS PETG Filament Bundle for 3D Printing Enthusiasts and Professionals
Tips
1. This link include PLA , PETG , ABS , please check careful when place order ;
2. All package will be shipped from overseas warehouses , delivery about 3-10 days ;
3. If you have any questions after receiving the goods, please contact customer service promptly. We will reply to you within 24 hours
Standard PLA Specification
*Wire diameter: 1.75MM
*Tolerance: ±0.03MM
*Printing temperature: 200-230℃
*Bottom plate temperature: need to apply glue when not heating
*Heating 60-80℃, no glue
*Rally (KGF): 11-16
*Melt index: 7-9g/10min
(190℃, 2.16Kg)
*Elongation at break: 4%
*Printing speed: 50-100MM/s
*Air bubbles: 100% zero bubbles
*Net weight: 1 KG/roll
*Gross weight: 1.2 KG/roll
Standard PETG Filament Features:
*PETG filament good toughness, high hardness, impact strength is 30 times more than PLA and the elongation at break of more than 50 time PLA.
*Compatible printers must have heating device, can print models have strict requirement of toughness and strength, such as: pedant, also can print strongly heated-resistance and transparent models, such as: lampshde.
*Diameter: 1.75mm
*Tolerance: +/-0.03mm
*Print speed: 50-100mm/s
*Recommend print Temperature: 230-250℃
*Platform temperature: 80-120℃
*Net weight: 1kg
*Gross weight: 1.2kg
ABS Description
1. Has excellent impact strength and wear resistance;
2. Chemical resistance, dyeing properties, molding processing
And mechanical processing effect is better;
3. The support is easy to peel off;
Suitable for equipment with heating device on the bottom plate, printable
Strong requirements for printing strength and the need for follow-up
Processed models, such as: dyeing, polishing, electroplating
Etc., suitable for making small parts.
ABS Specification
*Wire diameter: 1.75MM
*Tolerance: ±0.03MM
*Printing temperature: 230-270℃
*Bottom plate temperature: 80-120℃
*Melt index: 12-19g/10min
(220℃,10kg)
*Elongation at break: 25%
*Printing speed: 50-100MM/s
*Air bubbles: 100% zero bubbles
*Net weight: 1 KG/roll
*Gross weight: 1.3 KG/roll