Universal Yamaha Immobiliser Bypass Emulator for 2002-2021 Models with Water Resistant Casing and Dual Layer PCB

$40.32

Category:

Description

Universal Yamaha Immobiliser Bypass Emulator for 2002-2021 Models with Water Resistant Casing and Dual Layer PCB

Compatible 2002 – 2021 Yamaha models:

✔ YZF R1 / YZF R6

✔ FZ6N / FZ6S

✔ XJ6

✔ T-MAX

✔ X-MAX

✔ V-MAX

✔ MT03, MT07, MT09, MT10

✔ MAJESTY 400

✔ XSR700

✔ XSR900

This new version has had a redesign with the following:

Mechelectrics Custom Firmware – Exclusive firmware allows this to work on the widest range of models

Reduced Power Consumption – Less current drawn from battery in standby

Higher rated capacitors – No chance of emulator blowing capacitors as with the older designs

Dual layered PCB – Reduced corrosion when used in damp / wet conditions

Compact Design – No messy long wires

30% Smaller PCB – New design has reduced size and weight compared to old versions

Water resistant casing – Sealed unit so no water ingress

This item is designed for the following purposes:

Swap engines which no longer work with existing immobiliser unit (they are paired to engine ECU)

Enable users to remove damaged immobiliser units due to theft damage / recovery

Enable users to avoid high charges from Yamaha dealer for replacing matched immobiliser / ECU unit

Project bikes using Yamaha engine / ECU but no immobiliser (track day safety requirements)

Fault finding by omitting the immobiliser as source of starting issues

This new 6 wire version has the highest chance of compatibility as it uses the full manufacturer wiring schematic which also keeps the immobiliser dash LED functioning (varies depending on model).

Custom firmware flashed in house by Mechelectics to ensure this is the most widely compatible emulator on the market!

If it doesn’t work on your Yamaha model listed below, return for a full refund

Fitting Instructions

1) Simply trace your wiring from your key barrel transponder back to your ECU (usually under the fuel tank or headlight)

2) Unplug and plug in the ‘Plug and Play’ emulator.

3) You can now start your vehicle without transponder in the key